1. SECONDARY CONSTANT CURRENT and CURRENT MONITOR: This function includes a 6” diameter coil. The control can be operated in percent heat (AVC), or in direct amps. The function can be programmed to work with up to 9 transformer tap positions. Accuracy is +/-1% or better.

2. COMMUNICATION PORT: The control is shipped with an RS-232 chip installed. A second chip for RS-485 is included for field installation when this format is required. This port is used for:

• DOWNLOAD OF PROGRAMS: Remotely enter up top 75 weld programs to the selected SOLUTION-T control.
• UPLOAD OF WELD DATA. You can keyboard select having ASCII data sent for every weld or only for welds that have an out-of-range value. Included in this string will be:

• Weld number
• RMS weld current during the WELD portion only (not slopes, etc.)
• ELECTRODE FORCE at end of the weld (requires option #9181-05C)
• LINE VOLTAGE error (requires option #9181-06A)
• PROGRAM CHANGES

All SOLUTION controls now have the SOFT-TOUCH function that can be used when the operator’s hands are in the welding electrode area (requires installation of additional machine components).

• ANTI-TIEDOWN, ANTI-REPEAT
• KEYBOARD KEYLOCK with three security levels

75 WELD PROGRAMS, ALL RWMA welding functions, used without chaining:

• PREHEAT
• COOL AFTER PREHEAT (great for welding galvanized steel)
• UPSLOPE
• WELD
• DOWNSLOPE
• POSTHEAT
• QUENCH & TEMPER
• PULSATION

• HEAT STEPPER with computerized curve, requires only two values to be entered.
• TIP FORCE CALCULATOR to display required psi regulator setting for the selected TIP FORCE. This feature even accounts for HEAD WEIGHT in the calculation process.
• WELD HEAT “ON-THE-FLY” CHANGE, uses a + and – button on the keypad to increase or decrease the program heat by 1% each push. Change limits are customer set. Change of the heat setting in this way does not change the permanent program heat setting value.
• WATER SAVER driver
• RETRACTION
• CLAMP DELAY (ON delay or OFF delay)
• FORGE DELAY (for welding high-carbon materials)
• 32-DIGIT alpha/numeric display, bright LEDs
• WELD or PART COUNTER
• LIGHT CURTAIN FUNCTION
• ½ CYCLE WELD TIME capability

See the new SOLUTION-T CONTROLS price list for all models.

Contact Us for more information or assistance in specifying a control.